Stoppers for oval pipelinesStoppers for oval pipelines

OVO - Stoppers for oval pipelines

Inflatable oval stoppers are used to plug oval pipelines (egg shape pipelines) and sections of pipes. These inflatable stoppers are also a perfect solution for water or air tightness testing, being compliant with the DIN 4263 and NF P16-401 standards.

These pneumatic stopper systems can also be fitted with bypass tubes. These tubes allow gas or fluids to pass through during maintenance or testing operations.

Advantages

Reliability

  • Low cost
  • Total tightness
  • Extremely durable

Safety

  • Secure inflation
  • Highly resistant
  • DIN 4263 and NF P16-401 Standards

Installation

  • Rapid installation

Detailed information

  • Material: Coated fabric 1200 daN/5 cm
  • Technique: cold glue assembly
  • Length: 600 > 2400 mm
  • Inflation: by air
  • Temperature resistance: -20 to +60°C (please contact us for any use outside of this temperature range)
  • Max. inflation pressure: 0.8 bar
  • Max. back-pressure: 0.5 bar
  • Accessory: 1 x 3/4″ valve in the center of a base

Technical informations

S 30300450600200.80.5DIN 4263
S 40400600800220.80.5DIN 4263
S 505007501000230.80.5DIN 4263
S 5555010001300240.80.5DIN 4263
S 606009001200260.80.5DIN 4263
S 7070010501400280.80.5DIN 4263
S 8080012001600320.80.2DIN 4263
S 9090013501800360.80.2DIN 4263
S 100100015002000450.80.2DIN 4263
S 120120018002400600.80.2DIN 4263
T10062510001300280.80.5NF P16-401
T13080013001700360.80.5NF P16-401
T15090015002000450.80.2NF P16-401
T180108018002350600.80.2NF P16-401
T200120020002600650.80.2NF P16-401

You can not find your dimensions

Our design department employs the best project leaders and designers and will be pleased to develop and create a tailor-made product specially for your unique project.

tailored

Composition / Advice

Pre-installation tips
Inspect the pipeline and remove any rough elements (stones, deposits …). Do not inflate the stopper when it is outside the pipeline. Never place a foreign object between the walls of the pipe and the stopper.
Maintenance tips
Carefully check all the external surfaces to ensure that there are no obvious deformations (folds, bulges, or cuts). - Clean the product (using slightly soapy water but not a detergent), rinse and dry completely.
Storage advice
Deflate the stopper after each use - Store away from a source of light - Store at room temperature with a relative humidity between 40 to 70% - Ensure that the product is protected from potentially aggressive environments (corrosive products and vapours, solvents, salt water, rodents ...).

Standards / regulations

Standards
DIN 4263 and NF P16-401
Guaranty
1 year against all manufacturing defects

Download

Fact Sheets / Business Guides
  • This field is for validation purposes and should be left unchanged.

Accessories

Inflation hose