Inflatable platform gap filler
The inflatable platform gap filler is an inflatable solution integrated into the roof access gangways of all types of vehicles: train, bus, metro, tramway, or plane.
Once inflated, it fills the gap between the vehicle and the gangway during maintenance and/or vehicle manufacture. Thus it ensures the safety of the agents by preventing the fall of people and tools.
The gap filler is an innovative system that is quick and easy to install. As an alternative to the rigid system, its flexible material adapts to the shape of each vehicle gauge without damaging it. It is made to measure according to the gap to be filled and the dimensions of your gangways.
In addition, depending on your needs, there are two types of loopholes:
- a system with two supports (the vehicle and the gangway).
- and a system without contact with the vehicle (only on the gangway), its hardness is sufficient to secure the operator.
The system is operated by a control box allowing its air supply. This is installed by our service department and enhanced with options such as detection of pressure drop, vehicle presence detection, measurement of the vehicle/bridge space to adjust the inflation, etc. In addition to supplying the inflatable platform gap filler and its control box, maintenance and product use training can be organized.
To conclude, this inflation system is an essential tool for safe working.
Avantages
Use
- Quick and easy installation,
- Integration into the existing system,
- Quick inflation
Safety
- Audible and visual alarm in case of pressure loss,
- Protection of the operator,
- Protection of the vehicle,
- Safety valve to prevent overpressure,
- Non-slip surface,
- Safety indicators/markings.
Reliability
- Custom-made,
- Long service life,
- Adaptable to vehicle dimensions and gangway dimensions.
Informations détaillées
For a gap filler section type two supports:
- Material: polyurethane and inner bladder
- Technique: high-frequency welding
- Min/max length: 1000 to 10 000 mm
- Diameter min / max. : 200> 500 mm
- Inflation: in air
- Inflation pressure: 0,14 bar
- Accessories:
- interconnection union (male/female),
- force recovery skirt,
- valve,
- safety indicators/markings,
- and venturi (optional).
For a section of 2 cushions for a gap filler without contact with the vehicle:
- Material: Tridim
- Technique: hot vulcanization under vacuum in an autoclave
- Min/max length : 1000 to 10 000 mm
- Max width: 450 mm (125, 200 & 450 mm for 1 cushion)
- Clearance between the cushion and the vehicle: 30 mm
- Inflation: in air
- Max inflation pressure: 0.6 bar
- Accessories :
- 4 interconnecting unions,
- force recovery skirt,
- venturi (optional),
- and 2 valves.
Vous ne trouvez pas vos dimensions
Notre bureau d'études composé des meilleurs chefs de projets et de desssinateurs sauront imaginer et créer un produit sur-mesure spécialement pour vous et votre projet unique.