Lifting transformer winding by VTR lifting bagsLifting transformer winding by VTR lifting bags

VTR lifting bags for transformer winding

During the transformer assembly and after the winding drying phase, it’s sometimes necessary to adjust the height of the winding. VTR lifting bags are inserted between the winding levels and inflated to slowly raise the winding so that spacers can be inserted or removed.

This system for windings adjustment is an alternative to the conventional hammer and PTFE stick that may cause damage to the winding.



  • Easier lifting
  • Fast intervention
  • Multipoint adjustment


  • Pressure regulator
  • Safe operator intervention
  • Winding protected from damage


  • Uniform lifting
  • Suitable dimensions
  • Constant pressure on the winding

Detailed information

  • Material: high quality coated fabric
  • Manufacturing technique: hot vulcanization under vacuum in an  autoclave
  • Dimensions: standard and tailor-made > contact us
  • Shape: trapezoidal or rectangular
  • Inflation: air
  • Temperature resistance: -30 to +70°C
  • Max. inflation pressure: 3.5 or 5 bar depending on type
  • Max. thickness: 2 or 3 mm depending on type
  • Lifting stroke: depending on dimensions

Technical informations

Ref. Lenght (mm/inch) Base width (mm/inch) Top width (mm/inch)
VTR 120/60/40 120 / 4.72 60 / 2.36 40 / 1.57
VTR 120/70/50 120 / 4.72 70 / 2.75 50/1.96
VTR 150/50/40 150 / 5.90 50 / 1.96 40 / 1.57
VTR 160/80/50 160 / 5.90 80 / 3.14 50 / 196

You can not find your dimensions

Our design department employs the best project leaders and designers and will be pleased to develop and create a tailor-made product specially for your unique project.


Composition / Advice

Care during use
Avoid any contact with surfaces that are excessively abrasive or have cutting edges. Stabilise and guide the load to lift.
Storage advice
Store away from light, damp and temperature variations, in its original case.
Inflation advice
Comply with the stated service pressure levels, refer to the manual.

Standards / regulations

1 year against all manufacturing defects.
ISO 9001, ISO 140001, ISO 45001.
Product test
Product delivered with its compliance certificate


Fact Sheets / Business Guides
  • This field is for validation purposes and should be left unchanged.


Manifold kit
We use cookies to allow you to visit and use our site. Certain cookies are necessary for its functioning and cannot be deactivated. Other data collection cookies help us to improve the relevance of our content. These cookies are only activated if you consent to their use by clicking below.
Ces cookies permettent de suivre le parcours utilisateur, le passage sur un site pour une évaluation et une stratégie marketing.
Ces cookies permettent d'obtenir des statistiques de fréquentation anonymes du site afin d'optimiser son ergonomie, sa navigation et ses contenus.
Refuse all